Six-axis All-in-one Extractor and Sprayer

Main Characteristics：

——

1.With Japan YASKAWA servo control system, it is suitable for long-term operation in a harsh environment due to high protection class.

2.The action function of “quick picking-up and gentle putting-down” that is quick descending for picking up inside the die and slow descending for putting down outside the die after die sinking can achieve the stable and perfect extraction action.

3.It can stand by at the place closest to the spray after die sinking to shorten the spray falling time and greatly improve the spraying cycle.

4.Multiple die spraying programs can be added in the system as required. When changing the die, the previously saved program can be called directly on the human-machine interface for direct use to facilitate the operation and maintenance.

5.The human-machine interface touch screen is used to facilitate the adjustment and setting of various parameters. It has the function of fault diagnosis and display to facilitate subsequent fault diagnosis and repair.

6.The control box is reserved with signals for linking with die-casting machine for semi-automatic operation and with die-casting machine and extractor to form fully automatic equipment.

7.It is equipped with nozzle-type sprinkler group with good atomization effect and easy for replacement and installation.

8.It is featured by fixed-point spraying, circulating spraying and floating spraying.

9.Simultaneous and separate blowing is available for moving die and fixed die. No blowing is performed in the spraying state and no spraying is performed in the blowing state. It has the function of ascending blowing, for blowing while the sprinkler ascends after the spraying work is completed to clean the dirt on the die surface and keep the die surface clean.

10.The nozzle is controlled by leather bag (air-controlled water), which can precisely control the flow rate to meet the spraying needs of different products and different positions. With external mixing spraying, the spraying can be closed at the nozzle after each die is sprayed, thus reducing the consumption of release agent, reducing residues and improving the production environment of the die-casting workshop. Each nozzle continuously sprays air at the spraying interval to speed up the evaporation of water, and prevent the sprinkler from dripping water and reduce the residual water at the same time; after the spraying is finished, the strong air injection circuit with independent pressure setting can be used to further blow away the water and impurities.

Technical Parameters：

——